More Hyper than ever.

The Hypermotard 1100EVO SP takes the whole Hypermotard concept to a new level of extreme. Higher ground clearance, higher spec suspension, higher bars and even less weight makes the 1100EVO SP track-ready for action.

When Ducati first launched the Hypermotard project they knew that there would be extreme riders out there who wanted more - they just didn't realise there would be so many! With a racing heritage built on direct rider feed-back, and two years of a Hypermotard category in the Italian Ducati Desmo Challenge series, Ducati's reputation for listening to owners to improve their motorcycles has become legendary and the Hypermotard 1100EVO SP is no exception.

2010 Ducati Hypermotard 1100 EVO SP - International Specifications
MSRP: See Dealer

Chassis

Frame
Tubular steel Trellis frame
Wheelbase
1465mm (57.7in)
Rake
24°
Front Suspension
Marzocchi 50mm fully adjustable usd forks with DLC
Front Wheel Travel
195mm (7.7in)
Front Wheel
5-spoke in forged light alloy 3.50x17
Front Tyre
120/70 ZR17
Rear Suspension
Progressive linkage with fully adjustable Öhlins monoshock. Aluminium single-sided swingarm
Rear Wheel Travel
156mm (6.1in)
Rear Wheel
5-spoke forged light alloy 5.50x17
Rear Tyre
180/55 ZR17
Front Brake
2 x 305mm semi-floating discs, radially mounted Brembo Monobloc callipers 4-piston, 2-pad
Rear Brake
245mm disc, 2-piston calliper
Fuel Tank Capacity
12.4l - 3.3gallon (US)
Dry Weight
171kg (377lb)

Instruments
Digital unit with displays for: Speedometer, rev counter, lap times, time, oil temp, battery voltage, A & B trips, fuel reserve trip, scheduled maintenance. Warning lights for: Neutral, turn signals, high-beam, rev-limit, oil pressure, fuel reserve. Plus: Immobilizer system and management of DDA system

Warranty
2 years unlimited mileage
Body Colour (Frame/Wheel)
Corse red (red / black) - Corse white (red / black)
Versions
Dual seat
Seat Height
875mm (34.5in)

DDA
Standard equipment

DTC
Not available on this model

ABS
Not available on this model

Engine
Type
L-Twin cylinder, 2 valve per cylinder Desmodromic, air cooled
Displacement
1078cc
Bore x Stroke
98x71.5mm
Compression Ratio
11.3:1
Power
95hp (69.9kW) @ 7500rpm
Torque
75.9lb-ft 10.5kgm @ 5750rpm
Fuel injection
Siemens electronic fuel injection, 45mm throttle body
Exhaust
Lightweight 2-1-2 system with catalytic converter with twin lambda probes

Transmission
Gearbox
6 speed
Ratio
1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=24/28
Primary Drive
Straight cut gears, Ratio 1.84:1
Final Drive
Chain, Front sprocket 15, Rear sprocket 41
Clutch
Dry multiplate with hydraulic control

Emissions
Standard
Euro 3

Source:  http://www.totalmotorcycle.com/photos/2010models/2010-Ducati-Hypermotard1100EVOSP.htm